Most and least tolerable chemical impurities in water are the hardness producing ions, calcium and magnesium in different concentrations. And they are responsible for the hard scale that deposits and builds up in boiler tubes, pipe lines, condensers jackets, circulating system, cooking utensils and other equipment contracted by hot water.

2O SOLUTIONS Softener is used primarily to produce Zero soft water by highly acidic cation exchanger, which removes calcium and magnesium ions. Which are dissolved hardness producing compounds in the water and are replaced by sodium ions?

The H₂O SOLUTIONS series of water softeners are designed for counter current regeneration with up flow rate and co-current regeneration with down flow rate.

H₂O SOLUTIONS series softeners are designed for longer operating cycles, low regeneration cost. The systems incorporate the proven technique Of counter and co-counter currant regeneration flow rate to economically to suit the demand of soft water for medium scale industries and commercial use. APPLICATION Boiler & Cooling water feed. Process water for chemical & textile. Hospital/Hostels/Homes/Commercial & institutional waterpower plants/Ice plant.

A properly maintained pool is one that is visually and biologically cleans. If the chlorine and pH levels are maintained, bacteria and algae will be killed and the pool will be biologically safe. Filtration is mechanical process of removing insoluble matter from swimming pool water. Pool water carrying particulate matter, solids and debris is passed through filtering media that allow clear water to return to the pool. Water clarity is important for appearance, hygiene and safety.

Disinfection: Disinfection is the most important single factor in maintaining a safe pool. Chlorine is the most widely applied disinfecting agent for the swimming pool water. Its not only destroys harmful organisms such as bacteria, algae, fungi, viruses but it also destroys impurities that are not removed by filtration.

The industry is constantly asking for a higher quality of Demineralise water at affordable price. And Its found that, naturally available water is hardly suitable for industrial demands because of its dissolved contaminations likes number of mineral salts and compounds of Ca, Mg, Na, K & Fe carrying positive ions and So4, Cl, Co3, Hco3 and Sio2 etc carrying negative ions as well as organic and inorganic impurities.

The industrials requirement is a higher quality (dissolved salts free) of water, for the particular process formulations and utility of latest costly equipment, which cannot be Satisfied by natural water sources.

H₂O SOLUTIONS Demineralisers are designed based on latest coast effective ion exchange technique of counter current regeneration. The units consist of two corrosion free pressure vessels internally connected in series. The first column containing Cation absorbing exchanger and second column charged with an anion absorbing exchanger. The water flow through the bed of a Cation exchanger then the bed of an anion exchanger. Thus the systems remove dissolved salts from water to a specified degree.

After using total exchange capacity of systems Cation and anion regeneration must be carried out. The Cation exchanger is regenerated with an acid and anion exchange resin is regenerated with an alkali solution.

H₂O SOLUTIONS Demineralisers consists of acid/alkali proof pressure vessel with internal fittings and initial charge of Cation and Anion exchanger, set of regeneration equipment, hydraulic ejectors, acid and alkali tanks and conductivity meter to monitor treated water quality. These Demineralisers offer a practical range of capacities and flow rates necessary to serve wide variety of applications.